dmesg - Sapphire AMD Radeon R9 FURY
microcode: microcode updated early to revision 0xc6, date = 2018-04-17
Linux version 4.20.7-gentoo (root@main) (gcc version 8.2.0 (Gentoo 8.2.0-r6 p1.7)) #1 SMP Thu Feb 7 08:46:11 CET 2019
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000a21f8fff] usable
BIOS-e820: [mem 0x00000000a21f9000-0x00000000a222dfff] ACPI data
BIOS-e820: [mem 0x00000000a222e000-0x00000000a3f91fff] usable
BIOS-e820: [mem 0x00000000a3f92000-0x00000000a3f92fff] ACPI NVS
BIOS-e820: [mem 0x00000000a3f93000-0x00000000a3f93fff] reserved
BIOS-e820: [mem 0x00000000a3f94000-0x00000000b0d97fff] usable
BIOS-e820: [mem 0x00000000b0d98000-0x00000000b24f9fff] reserved
BIOS-e820: [mem 0x00000000b24fa000-0x00000000b250bfff] ACPI data
BIOS-e820: [mem 0x00000000b250c000-0x00000000b26c6fff] usable
BIOS-e820: [mem 0x00000000b26c7000-0x00000000b2ceefff] ACPI NVS
BIOS-e820: [mem 0x00000000b2cef000-0x00000000b3290fff] reserved
BIOS-e820: [mem 0x00000000b3291000-0x00000000b32fefff] type 20
BIOS-e820: [mem 0x00000000b32ff000-0x00000000b32fffff] usable
BIOS-e820: [mem 0x00000000b3300000-0x00000000b7ffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000645ffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.50 by American Megatrends
efi: ACPI 2.0=0xa21f9000 ACPI=0xa21f9000 SMBIOS=0xb3203000 SMBIOS 3.0=0xb3202000 MPS=0xfca00 ESRT=0xad971958
SMBIOS 3.0.0 present.
DMI: System manufacturer System Product Name/B150M-A/M.2, BIOS 3806 05/18/2018
tsc: Detected 3400.000 MHz processor
tsc: Detected 3408.000 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x646000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00B8000000 mask 7FF8000000 uncachable
2 base 00B4000000 mask 7FFC000000 uncachable
3 base 00B3800000 mask 7FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xb3300 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcc80-0x000fcc8f] mapped at [(____ptrval____)]
esrt: Reserving ESRT space from 0x00000000ad971958 to 0x00000000ad971990.
check: Scanning 1 areas for low memory corruption
Base memory trampoline at [(____ptrval____)] 95000 size 24576
Using GB pages for direct mapping
BRK [0x03801000, 0x03801fff] PGTABLE
BRK [0x03802000, 0x03802fff] PGTABLE
BRK [0x03803000, 0x03803fff] PGTABLE
BRK [0x03804000, 0x03804fff] PGTABLE
BRK [0x03805000, 0x03805fff] PGTABLE
BRK [0x03806000, 0x03806fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x376d1000-0x37b5ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000A21F9000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000A21F90B0 0000D4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000A2222028 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000A21F9218 028E0D (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x00000000B2CEEC40 000040
ACPI: APIC 0x00000000A2222140 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000A2222200 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: ASF! 0x00000000A222DA38 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: MCFG 0x00000000A22222A0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x00000000A22222E0 000390 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: FIDT 0x00000000A2222670 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000A2222710 003041 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x00000000A2225758 002544 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x00000000A2227CA0 000038 (v01 INTEL SKL 00000001 MSFT 0000005F)
ACPI: SSDT 0x00000000A2227CD8 000E3B (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x00000000A2228B18 000B1D (v02 INTEL xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x00000000A2229638 000042 (v01 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x00000000A2229680 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x00000000A222A560 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: WSMT 0x00000000A222A5F8 000028 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000A222A620 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x00000000A222A8C0 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x00000000A222D8C8 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x00000000A222D900 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: BGRT 0x00000000A222D958 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x00000000A222D990 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000645ffffff]
NODE_DATA(0) allocated [mem 0x645ff6000-0x645ff9fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000645ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000a21f8fff]
node 0: [mem 0x00000000a222e000-0x00000000a3f91fff]
node 0: [mem 0x00000000a3f94000-0x00000000b0d97fff]
node 0: [mem 0x00000000b250c000-0x00000000b26c6fff]
node 0: [mem 0x00000000b32ff000-0x00000000b32fffff]
node 0: [mem 0x0000000100000000-0x0000000645ffffff]
Zeroed struct page in unavailable ranges: 28998 pages
Initmem setup node 0 [mem 0x0000000000001000-0x0000000645ffffff]
On node 0 totalpages: 6254266
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11261 pages used for memmap
DMA32 zone: 720669 pages, LIFO batch:63
Normal zone: 86400 pages used for memmap
Normal zone: 5529600 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[mem 0xb8000000-0xf7ffffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
random: get_random_bytes called from start_kernel+0x8a/0x47d with crng_init=0
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 43 pages/cpu @(____ptrval____) s138136 r8192 d29800 u262144
pcpu-alloc: s138136 r8192 d29800 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 6156514
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 24286420K/25017064K available (12293K kernel code, 1176K rwdata, 2580K rodata, 1128K init, 2320K bss, 730644K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20181003
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x000000b1461000 end: 0x000000b1480fff
DMAR: RMRR base: 0x000000b3800000 end: 0x000000b7ffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Enabled IRQ remapping in xapic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x311fd3cd494, max_idle_ns: 440795223879 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6816.00 BogoMIPS (lpj=3408000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
SELinux: Initializing.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (54528.00 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xa3f92000-0xa3f92fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xb26c7000-0xb2ceefff] (6455296 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
kworker/u16:0 (51) used greatest stack depth: 14240 bytes left
xor: automatically using best checksumming function avx
RTC time: 20:52:54, date: 02/08/19
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1549659174.029:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
raid6: sse2x1 gen() 12468 MB/s
raid6: sse2x1 xor() 9115 MB/s
raid6: sse2x2 gen() 15308 MB/s
raid6: sse2x2 xor() 10390 MB/s
raid6: sse2x4 gen() 18187 MB/s
raid6: sse2x4 xor() 11472 MB/s
raid6: avx2x1 gen() 24871 MB/s
raid6: avx2x1 xor() 17806 MB/s
raid6: avx2x2 gen() 30460 MB/s
raid6: avx2x2 xor() 19832 MB/s
raid6: avx2x4 gen() 35816 MB/s
raid6: avx2x4 xor() 21962 MB/s
raid6: using algorithm avx2x4 gen() 35816 MB/s
raid6: .... xor() 21962 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: 9 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888629759000 000717 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888629B80800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888629759800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF888629748A00 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xb8000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:1912] type 00 class 0x038000
pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7310000-0xf731ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf732d000-0xf732dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xf7328000-0xf7329fff]
pci 0000:00:17.0: reg 0x14: [mem 0xf732c000-0xf732c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xf732b000-0xf732b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1f.0: [8086:a148] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xf7324000-0xf7327fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xf7320000-0xf7323fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xf7300000-0xf730ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xf732a000-0xf732a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [1002:7300] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xf7200000-0xf723ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xf7240000-0xf725ffff pref]
pci 0000:01:00.0: BAR 0: assigned to efifb
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:01:00.1: [1002:aae8] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7260000-0xf7263fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf7104000-0xf7104fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf7100000-0xf7103fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:03:00.0: [8086:f1a5] type 00 class 0x010802
pci 0000:03:00.0: reg 0x10: [mem 0xf7000000-0xf7003fff 64bit]
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci 0000:00:1d.0: bridge window [mem 0xf7000000-0xf70fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xa21f9000-0xa3ffffff]
e820: reserve RAM buffer [mem 0xa3f92000-0xa3ffffff]
e820: reserve RAM buffer [mem 0xb0d98000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb26c7000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb3300000-0xb3ffffff]
e820: reserve RAM buffer [mem 0x646000000-0x647ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
pnp: PnP ACPI init
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x1800-0x18fe] has been reserved
system 00:03: [io 0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0800-0x087f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf7fc0000-0xf7fdffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0xfe00-0xfefe] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci 0000:00:1d.0: bridge window [mem 0xf7000000-0xf70fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xb8000000-0xf7ffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf7100000-0xf71fffff]
pci_bus 0000:03: resource 1 [mem 0xf7000000-0xf70fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 4668K
DMAR: No ATSR found
DMAR: dmar0: Using Queued invalidation
DMAR: dmar1: Using Queued invalidation
DMAR: Hardware identity mapping for device 0000:00:00.0
DMAR: Hardware identity mapping for device 0000:00:01.0
DMAR: Hardware identity mapping for device 0000:00:02.0
DMAR: Hardware identity mapping for device 0000:00:14.0
DMAR: Hardware identity mapping for device 0000:00:16.0
DMAR: Hardware identity mapping for device 0000:00:17.0
DMAR: Hardware identity mapping for device 0000:00:1c.0
DMAR: Hardware identity mapping for device 0000:00:1d.0
DMAR: Hardware identity mapping for device 0000:00:1f.0
DMAR: Hardware identity mapping for device 0000:00:1f.2
DMAR: Hardware identity mapping for device 0000:00:1f.3
DMAR: Hardware identity mapping for device 0000:00:1f.4
DMAR: Hardware identity mapping for device 0000:01:00.0
DMAR: Hardware identity mapping for device 0000:01:00.1
DMAR: Hardware identity mapping for device 0000:02:00.0
DMAR: Hardware identity mapping for device 0000:03:00.0
DMAR: Setting RMRR:
DMAR: Ignoring identity map for HW passthrough device 0000:00:02.0 [0xb3800000 - 0xb7ffffff]
DMAR: Ignoring identity map for HW passthrough device 0000:00:14.0 [0xb1461000 - 0xb1480fff]
DMAR: Prepare 0-16MiB unity mapping for LPC
DMAR: Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0xffffff]
DMAR: Intel(R) Virtualization Technology for Directed I/O
pci 0000:00:00.0: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:00:00.0 to group 0
pci 0000:00:01.0: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:00:01.0 to group 1
pci 0000:00:02.0: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:00:02.0 to group 2
pci 0000:00:14.0: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:00:14.0 to group 3
pci 0000:00:16.0: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:00:16.0 to group 4
pci 0000:00:17.0: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:00:17.0 to group 5
pci 0000:00:1c.0: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:00:1c.0 to group 6
pci 0000:00:1d.0: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:00:1d.0 to group 7
pci 0000:00:1f.0: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:00:1f.0 to group 8
pci 0000:00:1f.2: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:00:1f.2 to group 8
pci 0000:00:1f.3: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:00:1f.3 to group 8
pci 0000:00:1f.4: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:00:1f.4 to group 8
pci 0000:01:00.0: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:01:00.0 to group 1
pci 0000:01:00.1: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:01:00.1 to group 1
pci 0000:02:00.0: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:02:00.0 to group 9
pci 0000:03:00.0: failed to allocate default IOMMU domain of type 4; falling back to IOMMU_DOMAIN_DMA
iommu: Adding device 0000:03:00.0 to group 10
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd3cd494, max_idle_ns: 440795223879 ns
clocksource: Switched to clocksource tsc
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=23 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
loop: module loaded
nvme nvme0: pci function 0000:03:00.0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.20.7-gentoo xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.20.7-gentoo xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb: port power management may be unreliable
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: registered as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
IR NEC protocol handler initialized
IR RC5(x/sz) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR Sharp protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR XMP protocol handler initialized
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
EFI Variables Facility v0.08 2004-May-17
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x506e3, pf=0x2, revision=0xc6
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (970617840, -557114)->(1000496595, -30435869)
registered taskstats version 1
Loading compiled-in X.509 certificates
Btrfs loaded, crc32c=crc32c-intel
Magic number: 7:38:902
hash matches drivers/base/power/main.c:689
usb usb2-port3: hash matches
nvme0n1: p1 p2 p3 p4
Freeing unused kernel image memory: 1128K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1516K
Run /init as init process
usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.24
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB3.0 Hub
usb 2-2: Manufacturer: GenesysLogic
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 1-2: new high-speed USB device number 2 using xhci_hcd
usb 1-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
usb 1-2: Manufacturer: GenesysLogic
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-9: new full-speed USB device number 3 using xhci_hcd
usb 1-9: New USB device found, idVendor=04d9, idProduct=a0d1, bcdDevice= 2.00
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9: Product: USB Gaming Keyboard
usb 1-9: Manufacturer: SQT
usb 1-2.2: new high-speed USB device number 4 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=05c6, idProduct=f000, bcdDevice= 3.10
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.2: Product: Android
usb 1-2.2: Manufacturer: Android
usb 1-2.2: SerialNumber: H2AXGV172364R6G
usb-storage 1-2.2:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-2.2:1.0
libata version 3.00 loaded.
modprobe (2520) used greatest stack depth: 13904 bytes left
usb 1-10: new full-speed USB device number 5 using xhci_hcd
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
ata1: SATA max UDMA/133 abar m2048@0xf732b000 port 0xf732b100 irq 132
ata2: SATA max UDMA/133 abar m2048@0xf732b000 port 0xf732b180 irq 132
ata3: SATA max UDMA/133 abar m2048@0xf732b000 port 0xf732b200 irq 132
ata4: SATA max UDMA/133 abar m2048@0xf732b000 port 0xf732b280 irq 132
ata5: SATA max UDMA/133 abar m2048@0xf732b000 port 0xf732b300 irq 132
ata6: SATA max UDMA/133 abar m2048@0xf732b000 port 0xf732b380 irq 132
usb 1-10: New USB device found, idVendor=251f, idProduct=1000, bcdDevice= 0.00
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10: Product: EpicGear Meduza mouse
usb 1-10: Manufacturer: 000000000000000
usb 1-2.4: new full-speed USB device number 6 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
usb 1-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-2.4: Product: CSR8510 A10
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-10: ADATA SU800, P1021A, max UDMA/133
ata5.00: 500118192 sectors, multi 2: LBA48 NCQ (depth 32), AA
ata6.00: ATA-10: ADATA SU800, P0801A, max UDMA/133
ata6.00: 500118192 sectors, multi 2: LBA48 NCQ (depth 32), AA
ata1.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata5.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access ATA ADATA SU800 1A PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:0:0: Direct-Access ATA ADATA SU800 1A PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 6:0:0:0: [sdc] 4096-byte physical blocks
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdb] Attached SCSI disk
sd 6:0:0:0: [sdc] Attached SCSI disk
sd 1:0:0:0: [sda] Attached SCSI disk
modprobe (2690) used greatest stack depth: 13296 bytes left
input: SQT USB Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:04D9:A0D1.0001/input/input4
hid-generic 0003:04D9:A0D1.0001: input,hidraw0: USB HID v1.10 Keyboard [SQT USB Gaming Keyboard] on usb-0000:00:14.0-9/input0
input: SQT USB Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:04D9:A0D1.0002/input/input5
input: SQT USB Gaming Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:04D9:A0D1.0002/input/input6
input: SQT USB Gaming Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:04D9:A0D1.0002/input/input7
input: SQT USB Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:04D9:A0D1.0002/input/input8
hid-generic 0003:04D9:A0D1.0002: input,hiddev96,hidraw1: USB HID v1.10 Keyboard [SQT USB Gaming Keyboard] on usb-0000:00:14.0-9/input1
hid-generic 0003:04D9:A0D1.0003: hiddev97,hidraw2: USB HID v1.10 Device [SQT USB Gaming Keyboard] on usb-0000:00:14.0-9/input2
input: 000000000000000 EpicGear Meduza mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:251F:1000.0004/input/input10
hid-generic 0003:251F:1000.0004: input,hidraw3: USB HID v1.00 Mouse [000000000000000 EpicGear Meduza mouse] on usb-0000:00:14.0-10/input0
input: 000000000000000 EpicGear Meduza mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:251F:1000.0005/input/input11
scsi 0:0:0:0: Direct-Access Linux File-CD Gadget 0310 PQ: 0 ANSI: 2
sd 0:0:0:0: Attached scsi generic sg3 type 0
sd 0:0:0:0: Power-on or device reset occurred
scsi 0:0:0:1: Direct-Access Linux File-CD Gadget 0310 PQ: 0 ANSI: 2
sd 0:0:0:1: Attached scsi generic sg4 type 0
sd 0:0:0:1: Power-on or device reset occurred
sd 0:0:0:0: [sdd] Attached SCSI removable disk
random: fast init done
sd 0:0:0:1: [sde] Attached SCSI removable disk
hid-generic 0003:251F:1000.0005: input,hiddev98,hidraw4: USB HID v1.00 Keyboard [000000000000000 EpicGear Meduza mouse] on usb-0000:00:14.0-10/input1
fuse init (API version 7.28)
libphy: r8169: probed
r8169 0000:02:00.0 eth0: RTL8168h/8111h, 34:97:f6:94:e7:d8, XID 54100880, IRQ 133
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
modprobe (3760) used greatest stack depth: 13272 bytes left
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
random: crng init done
BTRFS: device label 128GM2-ROOT devid 1 transid 1025402 /dev/mapper/root
BTRFS info (device dm-0): disk space caching is enabled
BTRFS info (device dm-0): has skinny extents
BTRFS info (device dm-0): enabling ssd optimizations
mount (4078) used greatest stack depth: 12824 bytes left
test (4116) used greatest stack depth: 12384 bytes left
init-early.sh (4121) used greatest stack depth: 11832 bytes left
udevd[4704]: starting version 3.2.7
udevd[4706]: starting eudev-3.2.7
parport_pc 00:01: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP(,...)]
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Bluetooth: Core ver 2.22
VFIO - User Level meta-driver version: 0.3
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
r8169 0000:02:00.0 enp2s0: renamed from eth0
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[drm] amdgpu kernel modesetting enabled.
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
CRAT table not found
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb0: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (FIJI 0x1002:0x7300 0x174B:0xE329 0xCB).
[drm] register mmio base: 0xF7200000
[drm] register mmio size: 262144
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
[drm] UVD is enabled in physical mode
[drm] VCE enabled in physical mode
amdgpu 0000:01:00.0: No more image in the PCI ROM
ATOM BIOS: 113-1E3290U-P4B
[drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
amdgpu 0000:01:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:01:00.0: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 512bits HBM
[TTM] Zone kernel: Available graphics memory: 12300118 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400300000).
[drm] Chained IB support enabled!
[drm] Found UVD firmware Version: 1.91 Family ID: 12
[drm] UVD ENC is disabled
[drm] Found VCE firmware Version: 55.2 Binary ID: 3
asus_wmi: ASUS WMI generic driver loaded
i915 0000:00:02.0: enabling device (0000 -> 0003)
[drm] VT-d active for gfx access
[drm] Replacing VGA console driver
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12
asus_wmi: Number of fans: 1
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled
[drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
nct6775: Enabling hardware monitor logical device mappings.
nct6775: Found NCT6793D or compatible chip at 0x2e:0x290
[drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[drm] Display Core initialized with v3.1.68!
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD initialized successfully.
[drm] VCE initialized successfully.
kfd kfd: Allocated 3969056 bytes on gart
Virtual CRAT table created for GPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add dGPU node [0x7300:0x1002]
kfd kfd: added device 1002:7300
[drm] fb mappable at 0xE098E000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.27.0 20150101 for 0000:01:00.0 on minor 0
[drm] Initialized i915 1.6.0 20180921 for 0000:00:02.0 on minor 1
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[drm] Cannot find any crtc or sizes
[drm] Cannot find any crtc or sizes
[drm] Cannot find any crtc or sizes
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
BTRFS: device label 1T-HDD-DATA devid 1 transid 96105 /dev/dm-2
Bluetooth: hci0: command 0x1003 tx timeout
BTRFS: device label 512G-SSD-DATA devid 1 transid 60257 /dev/dm-3
Bluetooth: hci0: command 0x1001 tx timeout
usb 1-2.4: USB disconnect, device number 6
BTRFS: device label 512G-SSD-DATA devid 2 transid 60257 /dev/dm-4
Bluetooth: hci0: command 0x1009 tx timeout
BTRFS info (device dm-0): use zstd compression, level 0
BTRFS info (device dm-0): enabling auto defrag
BTRFS info (device dm-0): disk space caching is enabled
Adding 2097148k swap on /dev/mapper/crypt-swap. Priority:-2 extents:1 across:2097148k SS
FAT-fs (nvme0n1p4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
BTRFS info (device dm-3): force zstd compression, level 0
BTRFS info (device dm-3): enabling auto defrag
BTRFS info (device dm-3): disk space caching is enabled
BTRFS info (device dm-3): has skinny extents
BTRFS info (device dm-3): enabling ssd optimizations
BTRFS info (device dm-2): use zstd compression, level 0
BTRFS info (device dm-2): enabling auto defrag
BTRFS info (device dm-2): disk space caching is enabled
BTRFS info (device dm-2): has skinny extents
udevd (4761) used greatest stack depth: 11480 bytes left
usb 1-2.4: new full-speed USB device number 7 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
usb 1-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-2.4: Product: CSR8510 A10
elogind-daemon[5519]: New seat seat0.
elogind-daemon[5519]: Watching system buttons on /dev/input/event2 (Power Button)
elogind-daemon[5519]: Watching system buttons on /dev/input/event1 (Power Button)
elogind-daemon[5519]: Watching system buttons on /dev/input/event0 (Sleep Button)
elogind-daemon[5519]: Watching system buttons on /dev/input/event4 (SQT USB Gaming Keyboard)
elogind-daemon[5519]: Watching system buttons on /dev/input/event5 (SQT USB Gaming Keyboard)
elogind-daemon[5519]: Watching system buttons on /dev/input/event7 (SQT USB Gaming Keyboard System Control)
elogind-daemon[5519]: Watching system buttons on /dev/input/event8 (SQT USB Gaming Keyboard Consumer Control)
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
Generic PHY r8169-200:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
tun: Universal TUN/TAP device driver, 1.6
elogind-daemon[5519]: New session 1 of user ashwin.
cc1 (9436) used greatest stack depth: 11440 bytes left
r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
btrfs (24163) used greatest stack depth: 11408 bytes left